FASCIAS
Fascia (II) Mammoth/Ogee Mammoth Board/Mammoth Bullnose Fascia
Are to be constructed from Mammoth/ Ogee Mammoth Board with a nominal thickness of 18mm or Mammoth Bullnose Fascia with a norminal thickness of 16mm, secured at 600mm centres to rafter feet with 65mm plastic-headed nails,400mm centres for laminated woodgrain with a minimum of 2 fixings per rafter.
Joints to be supported and made at rafter feet, with both ends fixed, leaving a 5mm air gap and be covered with a joint trim, secured in position with Silicone Sealant, a proprietary adhesive or pins.
Gutter brackets are fixed through the fascia, with 40mm x 10 stainless steel screws.